Žižmond, J, Dolšek, M. Evaluation of factors influencing the earthquake-resistant design of reinforced concrete frames according to Eurocode 8. Structure and infrastructure engineering, 2016
Lazar, N, Dolšek, M. Incorporating intensity bounds for assessing the seismic safety of structures: Does it matter? Earthquake engineering & structural dynamics 2014, 43(5): 717-738, doi: 10.1002/eqe.2368.
Žižmond, J, Dolšek, M. The fomulation of risk-targeted behaviour factor and its application to reinforced concrete buildings. In: 16th World Conference on Earthquake Engineering : January 9th to 13th 2017, Santiago, Chile. Santiago: Chilean Association of Seismology and Earthquake Engineriing; Tokyo: International Association for Earthquake Engineering, 2017, pp. 1-11.
Žižmond, J, Dolšek, M. Risk-targeted force-based design and performance check by means of nonlinear analysis. In: Tenth Pacific Conference on Earthquake Engineering, 6-8 November 2015, Sydney, Australia. Building an Earthquake Resilient Pacific. Sydney: Australian Earthquake Engineering Society, 2015, pp. 1-8.
Dolšek, M, Šebenik, Ž, Klinc, R, Dolenc, M, Brozovič, M. Web Application for the Selection of Characteristic Ground Motions. V: 6th International Conference on Earthquake Geotechnical Engineering, 1-4 November 2015, Christchurch, New Zeland. Earthquake geotechnical engineering : proceedings. Christchurch: ICEGE, 2015, pp. 1-9
Brozovič, M, Dolšek, M. Risk-based design check for collapse safety using few ground motions. In: COMPDYN 2015, 5th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Crete Island, Greece, 25-27 May 2015, pp. 1-9.
Žižmond, J, Dolšek, M. Demand hazard analysis: a tool for assessing the adequacy of capacity design approach for definition of the design shear forces in the frame buildings. In: COMPDYN 2015, 5th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Crete Island, Greece, 25-27 May 2015, pp. 1-11.
Lazar, N, Dolšek, M. Risk-based seismic design of buildings using an efficient pushover analysis procedure. In: DEODATIS, George (ed.), ELLINGWOOD, Bruce R. (ed.), FRANGOPOL, Dan M. (ed.). Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures. London: CRC Press: Taylor & Francis Group, 2014, pp. 1711-1718.
Brozovič, M, Dolšek, M. Envelope-based pushover analysis procedure for assessing thee collapse risk of buildings. In: DEODATIS, George (ed.), ELLINGWOOD, Bruce R. (ed.), FRANGOPOL, Dan M. (ed.). Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures. London: CRC Press: Taylor & Francis Group, 2014, pp. 5019-5026.
Brozovič, M, Dolšek, M. Selection of few ground motions for decision making associated with no-collapse requirement. Proceedings of the 2nd European Conference on Earthquake Engineering and Seismology, Istanbul, 25.-29.8.2014, pp 1-11.
Žižmond, J, Podgorelec, D, Dolšek M. Relationship between the collapse risk and the reinforced concrete frame structure. Proceedings of the 2nd European Conference on Earthquake Engineering and Seismology, Istanbul, 25.-29.8.2014, pp 1-11.
Lazar, N, Dolšek, M. Effect of Intensity Bounds on the Seismic Safety of Structures. Proceedings of 10th U.S. National Conference on Earthquake Engineering, Frontiers of Earthquake Engineering 2014, pp. 1-10.
Brozovič, M, Dolšek, M. Pushover-based procedure for approximate simulation of system failure modes observed due to ground motions. Proceedings of 10th U.S. National Conference on Earthquake Engineering, Frontiers of Earthquake Engineering, 2014, pp. 1-10.
Lazar, N., Dolšek, M. Application of the risk-based seismic design procedure to a reinforced concrete frame building. In: COMPDYN 2013, International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering and SEECCM III, 3rd South-East European Conference on Computational Mechanics. Computational Methods in Structural Dynamics and Earthquake Engineering, Kos Island, Greece, 12-14 June 2013, pp. 1-14.
Žižmond, J, Dolšek, M. Deaggregation of seismic safety in the design of reinforced concrete buildings using Eurocode 8. In: COMPDYN 2013, International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering and SEECCM III, 3rd South-East European Conference on Computational Mechanics. Computational Methods in Structural Dynamics and Earthquake Engineering, Kos Island, Greece, 12-14 June 2013, pp. 1-14.
Dolšek, M. A conceptual framework for seismic design of buildings using nonlinear analysis methods: paper no. 480. In: Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 - VEESD 2013. Vienna: Technische Universität, 2013, pp. 1-8.
